Perahome

Product Code: EG Features: Hard Wearing, Flexible, Fully Cleanable, UV Resistant PERA GLOSS PVA is a glossy, pure Acrylic emulsion paint with excellent clean ability for interior and exterior use, providing an exclusive and durable finish. Use on suitable primed metal and wood. PROPERTIES DATA UNITS Resin Type Pure Acrylic - Drying Times - Touch Dry 20 minutes Drying Times - Hard Dry 2 hours Over coating Time 6 hours Recommended number of coats 2 - Coverage 8 m² / Ltr Surface Apperance Gloss - Cleaning Solvent Water - Shelf Life 6 months Available Colours Whilte, Other Colours available on request (Available in 3 base colours) - Unit Sizes and Weights 20Ltr =22,9kg, 5Ltr = 5,9kg, 1Ltr = 1.3kg Ltr = kg SUBSTRATE PRIMER Wood - New 1 or 2 Coats Pera Seal Wood - Previously Coated * N/A Galvanized Iron - New Apply 1 coat Pera Metal Primer Galvanized Iron - Previously Painted ** Prepare as below Steel - New Apply 1 coat Pera Metal Primer Steel - Previously Painted *** Prepare as below Previously coated* wood : Poor condition: Remove existing paint completely, and continue as for new wood. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed. Touch up holes and cracks with Pera Mastix. Leave to dry.  Previously coated** galvanized iron: Poor condition: Remove existing paint completely, and continue as for new galvanized iron. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed.  Previously coated*** steel: Poor condition: Remove existing paint completely, and continue as for new steel. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed. Touch in bare areas with Pera metal primer. Apply 2 coats Pera Gloss PVA with a short pile roller, brush or via spraying. NB:  Pera Gloss PVA is not suitable for door- or window frames, due to blocking. For sealer, primer and filler application instructions, see relevant data sheets. Remember - a system is only as good as the substrate. For application on surfaces, other than above, please contact our sales department (Tel: (061) 22 7050) or the technical For application surfaces, other than above, please contact our sales department. Gloves X Mask - Goggles X Swallowed Rinse mouth with water. Give water to drink. Seek medical attention! Eye Contact Rinse eyes with water and seek medical attention! Skin Contact Immediately wash skin with soap and water. Ventilation Ensure adequate ventilated application area. Spillages Prevent runn off into drains or water ways. Storage Keep container tightly closed. Store in cool, dry place out of direct sunlight Flammable Not flammable. Always keep product out of reach of children. Do not ingest. Avoid eye contact.  ...

Product Code: EO Features: Economically priced, Good Hiding Power, Cleanable, Matt Finish PERA MATT PVA is a water based emulsion paint for interior and exterior use on plaster, concrete, fibre cement and Cellotex with good durability. Improved formula for mixing in pastel and deep colours with better dry hiding. PROPERTIES DATA UNITS Resin Type Acrylic - Drying Times - Touch Dry 20 minutes Drying Times - Hard Dry 2 hours Over coating Time 6 hours Recommended number of coats 2 - Coverage +/- 7 m² / Ltr Surface Apperance Matt - Cleaning Solvent Water - Shelf Life 6 months Available Colours Whilte, Other Colours available on request. This quality is only made in pastel and deep shaded - Unit Sizes and Weights 20Ltr = 32.6kg, 5Ltr = 7.7kg, 1Ltr = 1.6kg Ltr = kg SUBSTRATE SEALER / FIRST COAT UNDERCOAT / FIRST COATER Mineral or Fiber Cement Substrate - New One coat Pera Aquaprime N/A Mineral or Fiber Cement Substrate - Previously Coated * Prepare as below N/A Cellotex - New One coat Pera Seal N/A Cellotex - Previously Coated *** Prepare as below N/A Previously coated*mineral surface or fiber cement : Poor condition: Remove existing paint completely. Make sure plaster or concrete surface is in good condition. Continue as for new mineral substrate or Fiber Cement substrate. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed. Touch up holes and cracks with Pera Mastix (interior) or Pera Crackfiller (exterior). After drying seal Pera Crackfiller with Pera Seal. Previously coated** Cellotex: Remove poorly adhering paint and sand down glossy surfaces. Make sure surface is clean and dry. Apply 2 coats PERA MATT PVA with a sheepskin roller. NB: Always use a sealer and / or primer, before applying Pera Matt PVA. For sealer and filler application instructions, see relevant data sheets. Remember - a system is only as good as the substrate. For application surfaces, other than above, please contact our sales department. Gloves X Mask - Goggles X Swallowed Rinse mouth with water. Give water to drink. Seek medical attention! Eye Contact Rinse eyes with water and seek medical attention! Skin Contact Immediately wash skin with soap and water. Ventilation Ensure adequate ventilated application area. Spillages Prevent runn off into drains or water ways. Storage Keep container tightly closed. Store in cool, dry place out of direct sunlight Flammable Not flammable. Always keep product out of reach of children. Do not ingest. Avoid eye contact.  ...

Product Code: EAG Features: Hard Wearing, Fully Cleanable, UV Resistant PERA SILK PVA is a superior quality, pure Acrylic emulsion paint with excellent clean ability for interior and exterior use, providing an exclusive and durable finish. Suitable for use on clean galvanized iron, suitable primed steel, plaster and concrete, as well as for cool-rooms, schools and kitchens ect. PROPERTIES DATA UNITS Resin Type Pure Acrylic - Drying Times - Touch Dry 20 minutes Drying Times - Hard Dry 2 hours Over coating Time 6 hours Recommended number of coats 2 - Coverage 7 to 8 m² / Ltr Surface Apperance Sheen - Cleaning Solvent Water - Shelf Life 6 months Available Colours Whilte, Other Colours available on request - Unit Sizes and Weights 20Ltr =25,7kg, 5Ltr = 7kg, 1Ltr = 1.4kg Ltr = kg SUBSTRATE CLEANER SEALER / FIRST COATER PRIMER Mineral Substrate - New One coat Pera Aquaprime One coat Pera Aquaprime N/A Mineral Substrate - Previously Coated * Prepare as below Prepare as below N/A Galvanized Iron - New Clean with Pera Metal Cleaner N/A Apply 1 coat Pera Antirust Galvanized Iron - Previously Painted ** Prepare as below N/A Prepare as below Steel - New Clean with Pera Metal Cleaner N/A Prepare as below Steel - Previously Painted *** Prepare as below N/A Prepare as below Previously coated* mineral surface : Poor condition: Remove existing paint completely, and continue as for new mineral substrate. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed. Touch up holes and cracks with Pera Mastix. Leave to dry.  Previously coated** galvanized iron: Poor condition: Remove existing paint completely, and continue as for new galvanized iron. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed.  Previously coated*** steel: Poor condition: Remove existing paint completely, and continue as for new steel. Good condition: Ensure surface is clean and dry, glossy surfaces have to be sanded down. Poorly adhering, or defective paint must be removed. Touch in bare areas with Pera Antirust. Apply 2 coats Pera Silk PVA with a sheepskin roller, brush or via spraying. NB: Always use a sealer and / or primer, before applying Pera Silk PVA. For sealer and filler application instructions, see relevant data sheets. Remember - a system is only as good as the substrate. For application surfaces, other than above, please contact our sales department. Gloves X Mask - Goggles X Swallowed Rinse mouth with water. Give water to drink. Seek medical attention! Eye Contact Rinse eyes with water and seek medical attention! Skin Contact Immediately wash skin with soap and water. Ventilation Ensure adequate ventilated application area. Spillages Prevent runn off into drains or water ways. Storage Keep container tightly closed. Store in cool, dry place out of direct sunlight Flammable Not flammable. Always keep product out of reach of children. Do not ingest. Avoid eye contact.  ...